KRB Electronic Solutions

• Dual-channel Oscilloscope+25MHz Signal Generator
• 120MHz bandwidth
• Dual-channel independent 1GS/s real-time sampling rate
• 20M memory depth
• Support 30 Automatic Waveform Measurements
• 6-digit High-precision Frequency Counter
• FFT Spectrum Analysis
• Communicate with PC via USB Device interface, support SCPI and LabVIEW functions, provide free computer software and some programming development demos, so you can remotely control the instrument and conduct secondary development.
• 7-inch TFT LCD display
• Includes 10X 120 Mhz Oscilloscope Probes- 2, & BNC Cable- 1

The HDS272S is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank.

Signals can be recorded and stored internally, good for up to 8k data points. Waveforms can also be stored as image or CSV, to be exported via USB to a PC host.

Besides being an oscilloscope, it independently acts as a fully featured 20,000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display.

• Oscilloscope + multimeter + waveform generator, multifunction in one
• Oscilloscope: Dual Channel (2),  Bandwidth: 70 Mhz
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

• Oscilloscope + multimeter + waveform generator, multifunction in one
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, can work continuously for 3-6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• 200Mhz, 1 GS/a, 2 Channel

Accessories Include:

• USB Cable
• Multimeter Leads
• Soft Bag
• Probe
• Probe Adjust
• Quick Guide
• BNC to Alligator Clip

The OWON SDS1102+ offers a 7-inch color LCD screen with 800x480 resolution. The SDS1102+ has a ultra-thin body at only 70mm deep for portability, and it offers a 10K record length per channel of memory.

• 100 Mhz  Bandwidth / 2 Channels
• 1Gs/s Sampling Rate for Both Channels
• 10K Record Length
• 10 Mhz. Inbuilt Function Generator
• 6 Digit Inbuilt Frequency Counter
• 30 Automatic Measurements
• Full Math Functions with FFT
• USB Host Port + USB with Software
• SCPI / LabView Compatible
• 2pcs. 1/10 (100Mhz.) Probe
• 1 pc. BNC Probe for FG

Owon 100 MHz.,2 CH, VGA, Coloured LCD 8

• Bandwidth: 100MHz
• Sample rate: 1GS/s
• 10M record length for each channel
• Multi-function : auto-scale, Pass / Fail, and current-measuring
• LAN remote control
• Supported SCPI and labVIEW
• Smart design with easy portability
• Large 8 inch 800 x 600 pixels display
• VGA output for external display capability

Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; 4 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defence, embedded systems, computers, research and education.

• 2 channels which are respectively controlled by independent knobs.
• 150MHZ analog channel bandwidth
• Sampling rate up to 1 GSa/s
• 8M memory depth
• Vertical range 2mV/div ~ 10V/div
• Vertical resolution: 8bit
• Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
• BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
• Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures.
• A 3-digit digital voltage meter and a 6-digit hardware frequency indicator
• 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation etc.
• 2 sets of digital voltmeters
• Support threshold testing, free measurements within the screen.
• Abundant SCPI remote command control
• USB Host/Device.

Model   DSO2D15

Bandwidth 150MHz

Oscilloscope channels 2CH

Waveform generator - 1CH

Oscilloscope

Sample rate      1GSa/s (single channel) 500MSa/s (two channels)

Acquisition

Normal Sample data

Peak-to-peak value       Display high frequency and random burr

Average               Average waveform, times:  4, 8, 16, 32, 64, 128

High resolution                Up to 12bit

Input

Input coupling  DC, AC, GND

Input impedance            1MΩ±2% ‖20pF±3pF.

Probe attenuation factor            1X, 10X, 100X, 1000X

Voltage rating   300V CAT II

Maximum input voltage              300VRMS (10X)

Horizontal

Waveform interpolation              (sin x)/x

Maximum record length              Single channel maximum 8M

Two channels maximum 4M

Horizontal scale range 2ns/div~100s/div 1, 2, 5 step by step

Time base mode             Y-T, X-Y, Roll

Zero offset         ±0.5 div×minimum time base gear

Sample Rate and Delay Time Accuracy              ±25ppm

Sample Rate and Delay Time Accuracy              ±50ppm（at any interval greater than 1ms）

Vertical

Rising time in BNC position (typical)  2.4ns

Vertical resolution         8 bits resolution, each channel samples simultaneously

Vertical sensitivity         2mV/div to 10V/div

Offset range      ≥ 200mV/div, ±1V;

                         ＜200mV/div ±50V

Mathematical operation             +, -, ×, ÷, FFT

FFT        Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop

Bandwidth Limit             20MHz

Bass response（-3db）             In BNC position ≤ 10Hz

• Oscilloscope+ Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Oscilloscope Mode Bandwidth 40MHz Channel 2CH+DMM
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface.
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Standard Accessories:

• 1 * 3-in-1 Oscilloscope
• 1 * Clip Probes
• 1 * Test Probe
• 1 * Power Adapter
• 1 * USB Type-C Charging Cable
• 1 * Multimeter Probe
• 1 * Storage Bag and Manufacturer Certificate
• 1* Replaceable Test Wires Probes set

The DHO800 series is RIGOL's high-performance economical digital oscilloscope. Though compact in design, it has superior performance. It features a capture rate up to 1,000,000 wfms/s (in UltraAcquire Mode), 25 Mpts memory depth, 12 bits resolution, and low noise. The DHO800 series is a brand new economical digital oscilloscope designed for the vast mainstream digital oscilloscope market to meet their design, debugging, and test demands.

• Analog channel bandwidth: 100 MHz
• 4 analog channels
• up to 12-bit vertical resolution
• Real-time sample rate up to 1.25 GSa/s
• Memory Depth up to 25 Mpts
• Vertical sensitivity range: 500 μV/div to 10 V/div
• Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
• 7" (1024x600) capacitive multi-touch screen
• Supports Web Control interface

SIGLENT’s new SDS804X HD series high resolution digital storage oscilloscope is based on 2 GSa/s, 12-bit Analog-Digital Converters and front ends with excellent noise floor performance. With a 70MHz bandwidth, and a maximum record length of 50 Mpts, and has 4 analog channels + 16 digital channels mixed signal analysis ability.

Key Features:

• 12-bit High Resolution

     -12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s

      -Front ends with 70 μVrms noise floor @ 70 MHz bandwidth

       -2/4 analog channels, up to 700 MHz bandwidth

      -SPO technology

• Waveform capture rate up to 80,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
• Supports 256-level intensity grading and color temperature display modes.
• Up to 50 Mpts record length
• Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse width, Window, Runt, Interval,     Dropout, Pattern, Video (HDTV supported) , Qualified, Nth edge,   Delay, Setup/Hold time.
• Serial bus triggering and decoder, supports protocols I2C, SPI,   UART,  CAN, LIN.
• Segmented acquisition (Sequence) mode, dividing the maximum   record length into multiple segments (up to 80,000), according to   trigger conditions set by the user, with a very small dead time   between segments to capture the qualifying event.
• History waveform record (History) function, the maximum recorded   waveform length is 80,000 frames.
• Automatic measurements on 50+ parameters, supports statistics with   histogram, track, trend, Gating measurement, and measurements on   Math, History and Ref.
• 4 Math traces (2 Mpts FFT, addition, subtraction, multiplication,   division, integration, differential, square root, etc.), supports formula   editor.
• Abundant data analysis functions such as Search, Navigate,   Counter,  Bode plot and Power Analysis
• High Speed hardware-based Mask Test function, with Mask Editor   tool for creating user-defined masks
• 16 digital channels (optional)
• 25 MHz waveform generator(optional)
• 7” TFT-LCD display with 1024 * 600 resolution; Capacitive touch   screen supports multi-touch gestures.
• Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-   11/Telnet/Socket), Pass/Fail, Trigger Out
• Built-in web server supports remote control over the LAN port using a   web browser. Supports SCPI remote control commands. Supports   external mouse and keyboard. Supports NTP.

Standard Accessories:

• 1 x USB cable
• 1 x Quick start
• 4 x Passive probe ( 70 MHz) PB470
• 1 x Certificate of calibration
• 1 x Power cord

• Oscilloscope+ Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Oscilloscope Mode Bandwidth 40MHz Channel 2CH+DMM
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface.
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Standard Accessories:

• 1 * 3-in-1 Oscilloscope
• 1 * Clip Probes
• 1 * Test Probe
• 1 * Power Adapter
• 1 * USB Type-C Charging Cable
• 1 * Multimeter Probe
• 1 * Storage Bag and Manufacturer Certificate
• 1* Replaceable Test Wires Probes set

The DHO800 series is RIGOL's high-performance economical digital oscilloscope. Though compact in design, it has superior performance. It features a capture rate up to 1,000,000 wfms/s (in UltraAcquire Mode), 25 Mpts memory depth, 12 bits resolution, and low noise. The DHO800 series is a brand new economical digital oscilloscope designed for the vast mainstream digital oscilloscope market to meet their design, debugging, and test demands.

• Analog channel bandwidth: 70 MHz
• 4 analog channels
• up to 12-bit vertical resolution
• Real-time sample rate up to 1.25 GSa/s
• Memory Depth up to 25 Mpts
• Vertical sensitivity range: 500 μV/div to 10 V/div
• Max. capture rate of 1,000,000 wfms/s (in UltraAcquire mode)
• 7" (1024x600) capacitive multi-touch screen
• Supports Web Control interface

Bandwidth: 30 MHz
- Sample rate: 250 MS/s
- 8 inch high definition TFT display
- Ultra-thin body
- Channels: 2+1 (External), 30 Mhz

Accessories Include:

• Power Cord
• USB Cable
• CD Rom
• Probe
• Probe Adjust
• Quick Guide
• Soft Bag (Optional)

• Oscilloscope + multimeter
• Oscilloscope: Dual Channel (2),  Bandwidth: 40 Mhz
• 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
• 18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours
• USB Type-C interface, support power bank, support PC software connection
• Self-calibration function
• SCPI supported, facilitate secondary development
• Includes: USB cable, Set of test leads, Probe, BNC - alligator clips cable, Power adapter, Carrying pouch

The HDS242 is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank.

Besides being an oscilloscope, it independently acts as a fully featured 20,000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display.

4 channel DSO with 100 MHz bandwidth, 1 GSa/s sample rate, 40 MSa memory depth with a resolution of 800 x 600 pixel.

• 100MHz Bandwidth，1GS/s sample rate
• 8-bit high resolution ADC
• 40M record length max 70,000 wfms/s waveform refresh rate
• low back ground noise
• 8 inch 800 x 600 high resolution LCD
• SCPI, and LabVIEW supported
• multi- trigger, and bus decoding function (Optional)

Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth;  14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defence, embedded systems, computers, research and education.

• 2 channels which are respectively controlled by independent knobs.
• 100 MHZ analog channel bandwidth
• Sampling rate up to 1 GSa/s
• 8M memory depth
• Vertical range 2mV/div ~ 10V/div
• Vertical resolution: 8bit
• Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
• BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
• Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures.
• 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation etc.
• 2 sets of digital voltmeters
• Support threshold testing, free measurements within the screen.
• Abundant SCPI remote command control
• USB Host/Device.

• Oscilloscope+ Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Oscilloscope Mode Bandwidth 40MHz Channel 2CH+DMM
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface.
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Standard Accessories:

• 1 * 3-in-1 Oscilloscope
• 1 * Clip Probes
• 1 * Test Probe
• 1 * Power Adapter
• 1 * USB Type-C Charging Cable
• 1 * Multimeter Probe
• 1 * Storage Bag and Manufacturer Certificate
• 1* Replaceable Test Wires Probes set

• Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Standard Accessories:

• 1 * 3-in-1 Oscilloscope
• 2 * Clip Probes
• 1 * Test Probe
• 1 * Power Adapter
• 1 * USB Type-C Charging Cable
• 1 * Multimeter Probe
• 1 * Storage Bag and Manufacturer Certificate

An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 4 in 1 multifunction tester: Automotive Diagnostic, oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspending stand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standby two months; High-definition colour LCD screen display clear and delicate; Minimalist keyboard design simplify operation, easy to use.

With more than 80 kinds of car testing and scan the QR code on the back of device can open video help files to show you how to test vehicles.

• First test projects:  intake manifold vacuum degree & ignition, lampblack adjustment valve vacuum degree & ignition, exhaust ignition (idle), exhaust ignition (start).
• Start & Charge: Charging circuit, current and voltage.
• Actuator: Gasoline / Diesel.
• Bus Detection:   CAN bus data observation, CAN bus signal integrity, CAN bus LH long-term acquisition, LIN bus.
• Sensors:  air flow meter, camshaft, crankshaft, distributor, lambda sensor, throttle position. Ignition: Primary/Secondary.
• Oscilloscope: 2 channels oscilloscope, 80MHz bandwidth, 250M sampling rate.
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test;
• Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms; sine up to 25MHz

Package Tool case

• Type C cable 1
• Power Adaptor 1
• Multimeter Probe 1
• Test Leads with BNC plug and alligator clip HT324 2
• Auto Test Leads HT30B 1
• Auto Ignition Probe HT25 1
• Acupuncture Probe Set HT307 1
• Coil-on-Plug extension cord  HT308 1
• 20:1 Attenuator HT201 1

ToolWorld is Authorized Hantek Distributor 

Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth;  14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defence, embedded systems, computers, research and education.

• 2 channels which are respectively controlled by independent knobs.
• 100 MHZ analog channel bandwidth
• Sampling rate up to 1 GSa/s
• 8M memory depth
• Vertical range 2mV/div ~ 10V/div
• Vertical resolution: 8bit
• Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
• BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
• Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures.
• 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation etc.
• 2 sets of digital voltmeters
• Support threshold testing, free measurements within the screen.
• Abundant SCPI remote command control
• USB Host/Device.\
• Note: Includes 1 10X -- 100 Mhx Probe Only

ToolWorld is Authorized Hantek Distributor 

• Oscilloscope+ Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Oscilloscope Mode Bandwidth 40MHz Channel 2CH+DMM
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface.
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Standard Accessories:

• 1 * 3-in-1 Oscilloscope
• 1 * Clip Probes
• 1 * Test Probe
• 1 * Power Adapter
• 1 * USB Type-C Charging Cable
• 1 * Multimeter Probe
• 1 * Storage Bag and Manufacturer Certificate
• 1* Replaceable Test Wires Probes set

The CEX+ provides a richer trigger mode, 34 kinds of automatic parameter measurement and common mathematical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and can easily cope with the measurement needs of complex signals.

• Dual Channel, 50 Mhz
• Real Time Sample Rate: 1GSa/s
• Memory Depth 64kpts, Waveform Acquisition Rate ≥5000wfms/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Multi-frequency square wave optional,ouput standard square wave 10Hz, 100Hz, 1kHz,10kHz optional
• Various parameter measurement and waveform recording functions

ToolWorld is Authorized UNI-T Distributor- 

Includes calibration/conformity report

UPO1104 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 100MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 100MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

UNI-T CEX+ series provides a richer trigger mode,34 kinds of automatic parameter measurement and common mathmatical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and easily cope with the measurement needs of complex signals.

• Dual Channel, 200 Mhz
• Real Time Sample Rate: 1GSa/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Various parameter measurement and waveform recording functions

ToolWorld is Authorized UNI-T Distributor

Includes calibration/conformity report

The CEX+ provides a richer trigger mode, 34 kinds of automatic parameter measurement and common mathematical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and can easily cope with the measurement needs of complex signals.

• Dual Channel, 100 Mhz
• Real Time Sample Rate: 1GSa/s
• Memory Depth 64kpts, Waveform Acquisition Rate ≥5000wfms/s
• Display range 8div x16 div and has a new Autoset strategy ,which can easily cope with complex test scenarios
• HD color LCD screen display
• Multi-language optional ,With 9 languages, it can meet the needs of users in more countries
• Multi-frequency square wave optional,ouput standard square wave 10Hz, 100Hz, 1kHz,10kHz optional
• Various parameter measurement and waveform recording functions

ToolWorld is Authorized UNI-T Distributor- 

Includes calibration/conformity report

• Oscilloscope+ Multimeter: This multi-purpose station owns three universal test instrument functions. It is outgoing right-hand product for engineers.
• Oscilloscope Mode Bandwidth 40MHz Channel 2CH+DMM
• Intelligent charging control: Its lithium batteries can be recharged by either high current-5V/2A or ordinary computer USB interface.
• Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months
• Large-capacity lithium battery power supply:  18650 replaceable lithium battery power system, free from replace battery
• 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone
• AUTO one-key test: Magic tool and essential function for test newbie
• Volume small, one hand holding: The 45-degree suspension bracket design provide you a work station anywhere anytime
• One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective
• Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free
• Its cursor measurement function supports time and voltage manual measurement, and measure the required waveforms accurately
• One-click switching its Chinese and English language menu
• Colour LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify
• Minimalist keyboard design simplify operation, convenient to use.
• Unibody casing: fine touch feeling, favourable impact resistance, outstanding heat resistance, easy to disassemble.
• Self-calibration function: free from level drift after long time unused
• Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test
• Function of video help：scan code on back of machine to get help of video course.
• The PC software supports windows7/8/10 32-bit and 64-bit.

Standard Accessories:

• 1 * 3-in-1 Oscilloscope
• 1 * Clip Probes
• 1 * Test Probe
• 1 * Power Adapter
• 1 * USB Type-C Charging Cable
• 1 * Multimeter Probe
• 1 * Storage Bag and Manufacturer Certificate
• 1* Replaceable Test Wires Probes set

UPO1054 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 50MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

The UTD2000CL+ Series is a market-proven economical digital oscilloscope.  This series of digital oscilloscopes has excellent technical indicators and can meet the main needs of basic testing. The front panel design is clear and intuitive,fully in line with the traditional instrument usage habits, and is convenient for users to operate

• Bandwidth: 100MHz
• Measurement channel: 2 analog channels
• Real-time sampling rate: 500MS/S
• Storage depth: 64kpts
• Waveform capture rate: 5,000wfms/s

ToolWorld is Authorized UNI-T Distributor

Includes calibration/conformity report

MSO3000HD series high-resolution oscilloscope has the maximum bandwidth of 500 MHz, the maximum Sample rate of 2.5 GSa/s, and is equipped with 4 analog channels and 16 digital channels, with the memory depth of up to 500 Mpts. MSO3000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 1,500,000 wfms/s, with 256 levels of gray temperature colours, and features an innovative digital trigger system with high trigger sensitivity and low jitter.

• Analog channel bandwidth: 200 MHz
• Real-time sample rate 2.5 GSa/s
• 12-bit vertical resolution
• 4 analog channels, 16 digital channels
• Memory depth of up to 500 Mpts
• Waveform capture rate is up to 500,000 wfms/s (sequence mode: 1,500,000 wfms/s)
• 9 instrument functions: digital oscilloscope, logic analyzer, function/arbitrary waveform generator, spectrum analyzer, digital voltmeter, frequency meter, protocol analyzer, bode plot analyzer and power analyzer.
• Uninterrupted hardware real-time waveform recording and analysis of up to 125,000 frames
• Enhanced FFT of up to 4M points
• Supports ERES (enhanced resolution) of up to 4-bit
• 54 kinds of parameter measurements. adds histogram and line graph display
• Multi-Windows display
• Multi-channel 7-digit hardware frequency meter
• DVM multi-channel RMS measurement: DC, AC RMS and DC+ACRMS
• Protocol triggering and decoding function:RS232/UART, I2C, SPI, CAN, CAN-FD, LIN, Flex Ray, Audio, MIL-STD-1553B, Manchester, SENT, ARINC429
• Zone trigger for capturing sporadic signals and observing complicated signals.
• 10.1-inch 1280x800 HD capacitive multi-touch screen
• Built-in Webserver

MSO7000X series integrates 9 instrument functions, which includes Digital Oscilloscope, Logic Analyzer, Function/Arbitrary Waveform Generator, Spectrum Analyzer, Digital Voltmeter, High-Precision Frequency Counter, Protocol Analyzer, Jitter/Eye Analyzer and Power Analyzer. This oscilloscope offers a cost-effective solution for advanced users.

• Analog channel bandwidth: 1 GHz/2 GHz
• Real-time sampling rate of the analog channel is up to 10 GSa/s. The maximum sampling rate of the digital channel is 1.25 GSa/s
• 4 analog channels, 16 digital channels. Maximum memory depth: 1 Gpts
• The maximum waveform capture rate is 800,000 wfms/s in UltraAcq® mode, 2,000,000 wfms/s in sequence mode
• 9 instrument functions: Digital Oscilloscope, Logic Analyzer (requires MSO7000X-LA and UT-M15), Function/Arbitrary Waveform Generator (option), Spectrum Analyzer, Digital Voltmeter, Frequency Counter, Protocol Analyzer, Jitter/Eye Analyzer (option) and Power Analyzer (option)
• Built-in dual-channel 60MHz function/arbitrary waveform generator. Supports loading on-screen oscilloscope data for real-time arbitrary waveform output. Additionally, it includes over 200 built-in arbitrary waveforms, enhancing its versatility and functionality.
• Parameter measurement adds histogram and line graph display
• Maximum 1 Mpts enhanced FFT, supporting the spectrum analyzer functions of Amplitude spectrum, Power spectrum, Psd, Real part, Imaginary part, Phase spectrum
• 54 kinds of parameter measurement
• Mask and limit testing is a standard function of the MSO7000X. Capture or import waveforms and use them as reference.
• Multi-channel 8-digit hardware frequency counter, supporting adjustable frequency refresh time and effective digit
• 4-digit Digital Voltmeter (DVM): DC, AC RMS, and DC+AC RMS
• 22 advanced trigger types: edge, pulse width, ramp, runt pulse, over-amplitude pulse, delay, timeout, duration, setup & hold, Nth edge, and code pattern
• Protocol trigger and decoding functions. Included: RS232/UART, I2C, SPI. Optional: CAN, CAN-FD, LIN, FlexRay, AUDIO, SENT
• Zone triggering for capturing accidental signal and observing complicated signal
• Ultra Phosphor 3.0 super phosphor display effect, up to 256 grey display
• 15.6-inch 1920x1080 HD capacitive multi-touch screen, supporting gesture control: click, slide, zoom, edit, and drag
• Multiple peripheral interfaces: USB 3.0 Host, USB 3.0 Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail, DVM), Gen Out, HDMI
• SCPI (Standard Command for Programmable Instrument)
• Built-in Webserver for accessing and controlling the instrument through a browser, supporting PC/Mobile phone device for cross-platform access to the instrument

Includes 10X Oscilloscope Probe with MX adaptor- As shown in picture

• 【Faster sampling speed】FNIRSI DSO152 mini oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth. The 10x probe can measure up to 800VPP, which is equivalent to 280V AC. Voltages up to ±400V can be measured.
• 【Professional Designed 】Features with full trigger function (AUTO/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8-inch high-definition LCD display screen, a resolution of 320*240, Type-C interface supports data transmission and charging support interface to update firmware directly.
• 【Portable Mini Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time. Applicable to the maintenance industry and R&D education industry. The highly practical oscilloscope can meet your daily testing needs.
• 【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters; the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline, fast measurement of waveforms, improve work efficiency.
• 【Longer Battery Life】Automotive oscilloscope has a built-in 1000mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. At the same time, it is equipped with a type-c charging cable, which can also be used while charging, which is very convenient.

ToolWorld is FNIRSI Authorized Distributor

DSO-153 is a highly practical and cost-effective handheld oscilloscope launched by our company, targeting the maintenance industry and development education industry. This oscilloscope has a real-time sampling rate of 5MS/s, 1MHz bandwidth, and complete triggering function (single, normal, auto). It can be used freely for both periodic analog signals and non-periodic digital signals and can measure up to ±400V voltage with an efficient one-click AUTO, which can display the measured waveform without complicated adjustments. Additionally, it features a function signal generator capable of outputting 14 types of signals (10KHz). Equipped with a 2.8-inch 320*240 resolution HD LCD screen and a built-in 1000mAh high-quality lithium battery, it can be used for about 4 hours when fully charged.

• 2.8-inch HD LCD display with 320*240 Resolution
• Portable Pocket Oscilloscope with Signal Generator
• Lightweight, mini-sized, assembled.
• Faster sampling: 5MS/s, 1MHz bandwidth.
• Versatile triggering: single, normal, auto.
• User-friendly: One-button setup.
• Extended battery: 1000mAh, 4 hours.
• Multi-functionality: 10KHz Sine Wave Generator.

• FNIRSI DSO152 Digital Handheld Pocket Oscilloscope
• FNIRSI DSO152 is a highly practical and cost-effective MINI handheld oscilloscope launched by FNIRSI, which is aimed at the maintenance industry and the R&D education industry.
• The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200KHz bandwidth.
• With full trigger function (single, normal, automatic),
• Works perfectly for both periodic analog signals and aperiodic digital signals.
• Voltages up to ±400V can be measured.
• Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.
• The display is equipped with a 2.8-inch high-definition LCD screen with a resolution of 320*240.
• Built-in 1000mah high-quality lithium battery, a full charge can be used continuously for about 5 hours.

Package Includes:

1 x FNIRSI DSO152 Oscilloscope – 2.8″ TFT Handheld Digital Oscilloscope, 2.5MS/s High Sampling Rate, 200KHz Bandwidth

The UNI-T UPO1082HD is a compact, high-resolution oscilloscope offering 80 MHz bandwidth and 12-bit ADC precision. Designed for professionals and educators, it features 100 Mpts memory depth, 1.25 GSa/s sample rate, and a 7-inch capacitive touchscreen with gesture support. Engineers can visualize waveform subtleties with Ultra Phosphor 3.0's 256-level intensity grading and capture rate up to 1M wfms/s. Six integrated instruments, protocol decoding, power analysis, and advanced triggering tools make this scope a flexible solution for embedded, analog, and power electronics.

Key Features

• 12-bit High Resolution – Offers 4096 quantization levels for enhanced signal detail
• 80 MHz Bandwidth – Optimized for power validation, analog sensor signals, and embedded systems
• 1.25 GSa/s Sample Rate – Clean signal capture of rapid transitions and glitches
• 2 Analog Channels – Streamlined setup for common test scenarios
• Ultra Phosphor 3.0 – 100,000 wfms/s standard, 1,000,000 wfms/s in sequence mode with 256-color intensity display
• 6-in-1 Instrument Integration – Includes oscilloscope, DVM, spectrum analyzer, frequency counter, protocol analyzer, and power analyzer
• Protocol Decoding Built-In – UART, I²C, SPI, CAN, LIN with time-correlated waveform display
• 100 Mpts Memory Depth – Allows long-duration captures with high fidelity
• Advanced FFT – 1M-point FFT with 4 traces, peak/marker tools, waterfall view
• Power Analysis Tools – Ripple, startup time, Rds(on), SOA, switching loss, and harmonics
• Type-C PD Power Input – Power from wall or portable charger
• SCPI & LAN/Web Control – Automate test routines or access remotely via browser

Package Contents

UPO1082HD Oscilloscope

2 × UT-P05 Passive Probes (200 MHz)

USB 2.0 Cable (UT-D14)

Type-C PD Power Adapter

User Manual & Calibration Certificate

UPO2000HD series high-resolution oscilloscope has the maximum bandwidth of 200 MHz, the maximum sampling rate of 2.5 GSa/s, with the memory depth of up to 100 Mpts. UPO2000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 1,000,000 wfms/s, with 256 levels of gray temperature colors, and features an innovative digital trigger system with high trigger sensitivity and low jitter. Multiple advanced measurement and analysis functions and rich trigger decoding types. Can be widely used in communication, aerospace, education and many other industries and fields.

• Bandwidth 200MHz
• Analaog Channels:4
• Real time sample rate 2.5GSa/s 
• 2D Infinite Zoom
• 56 types: Measurement, Statistics, Trend Graphs
• Protocol Decoding And Triggering
• Versatile Testing Equipment

UPO1204 digital oscilloscope adopts UNI-T's newly created digital 3D technology Fast Acquire Phosphor. It is equipped with three levels of bandwidth of 50MHz/100MHz/200MHz, and the real-time sampling rate is as high as 2GSa/s. The whole series is equipped with 4 channels as standard; supports independent DVM module; has rich trigger and bus decoding functions and supports full-memory hardware real-time decoding. It can be widely used in communication, semiconductor, computer, integrated circuit design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development/education and many other fields.

• Bandwidth: 200MHz
• Channel: 4
• Sampling rate: 2 GSa/s
• Waveform capture rate: 150,000 wfm/s, 500,000 wfm/s (Fast Acquire)
• Storage depth: 56 Mpts

ToolWorld is UNI-T Authorized Distributor

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability

• The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.
• With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.
• Maximum measured voltage signal is 400 V.
• Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments

 Functions (Component Tester)

• Automatically analyse NEC protocol infrared code.
• Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

 Functions (Signal Generator)

• The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.

 Included

1x DSO-TC3,1x P6100 Oscilloscope Probe (100 MHz),3x Test Hooks,1x Adapter,1x USB-C Cable,1x Original Manual by FNIRSI 

ToolWorld Lowest Price Gaurantee

• Auto 10M Sine Wave Signal Generator
• Tablet Oscilloscope
• 4½-Digit Automotive Multimeter
• Bandwidth 50MHz
• Auto Ranging Digital Multimeter
• Touch Screen Control
• 20MHz Bandwidth Limit
• IPS Color Touchscreen
• Mathematical Algorithm

The FNIRSI DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500 MS/s and an analog bandwidth of 180 MHz. The measurement results are displayed on the high-contrast 2.8-inch IPS full-view LCD screen with digital fluorescence technology. 

• 2-ch handheld oscilloscope & DDS signal generator
• 180 MHz bandwidth
• 500 MS/s sampling rate
• 20 MHz signal generator
• Innovative digital trigger system
• Cursor measurement function
• 5 mV sensitivity
• 50000 wfm/s waveform refresh rate
• 2.8" IPS full-vision high-definition display
• Built-in 4.2 V/3000 mAh lithium battery
• Automatic shutdown setting
• High-voltage anti-burning protection